COMPRESSION CLASSES IN SUPPORT STOCKINGS – MMHG AND DENIER
Medical compression stockings are divided into compression classes based on how much pressure they provide at the ankle. The class boundaries may vary between different standards.
The pressure is specified in mmHg (millimeters of mercury) and describes how much compression the stocking provides. The higher the value, the stronger the compression.
Common support stockings for everyday use often have lighter compression and fall at the lower end of the scale. They are primarily used to promote circulation and counteract tired and swollen legs. For these, it is clearer to state the compression level directly in mmHg, without using a medical class designation.
Compression Class 1
Compression class 1 is the lowest medical compression class. In the European RAL system corresponds to 18–21 mmHg. Other classification systems may have slightly different boundaries.
Support stockings for everyday use often have light compression of around 15–20 mmHg, but do not automatically belong to a medical compression class.
Support stockings with light compression are often used for:
-
tired or heavy legs
-
sedentary work
-
long journeys
-
pregnancy
-
work where you stand a lot
Medical compression stockings can also be used for diagnosed conditions, where the compression level is chosen based on the individual's needs.
Compression Class 2 and Higher
Compression class 2 and above provides stronger compression and is used for more pronounced medical conditions.
This can, for example, involve:
-
more severe circulatory problems
-
venous leg ulcers
-
lymphoedema treatment
-
pronounced varicose veins
This type of compression stocking is usually prescribed by a doctor or other qualified healthcare professional and is often fitted individually.
What does denier mean in support stockings?
Compression stockings and nylon support stockings are sometimes also specified in denier (DEN).
This can be a bit confusing because denier is basically a measure of the yarn's thickness. Denier describes the weight of a yarn that is 9000 meters long. The higher the weight of the yarn, the higher the denier rating.
For example, a yarn that is 9000 meters long and has 70 denier weighs a total of 70 grams.
Denier and Compression
When it comes to nylon support stockings, denier is sometimes also used to indicate the compression level in the stocking.
As a common industry guideline:
- 70 DEN corresponds to approximately 15–18 mmHg
- 140 DEN corresponds to approximately 18–21 mmHg
However, there is no standardized conversion, and the actual compression can vary between different manufacturers.
This does not mean, however, that a stocking with a higher denier is always thicker.
A 140 DEN compression stocking can sometimes be thinner and more transparent than a 70 DEN one. This is because both the stocking's thickness and compression are affected by the material, knitting technique, and construction, not just the thickness of the yarn.
What is most important to consider?
When choosing support stockings, the most important thing is not the denier but:
-
the correct compression level
-
a good fit
-
graduated pressure from the ankle up to the knee
If you want to read more about how to choose the right model, you can read our guide: How to choose the right support stockings